the new High temperature and high pressure melt pump

Pump body: CPM tool steel, titanium tantalum alloy

Gear: Hastelloy, other materials can be specified.

Sliding bearing: titanium tantalum alloy

Shaft seal: spiral seal

Heating system: electric heating

Specifications / flow range: from 5CC - 2000CC, 50cm3/rev - 2000cm3/rev

Viscosity: less than 30000 Pas

Temperature: less than or equal to 510 DEG C

The cleaning temperature: less than or equal to 510 DEG C

Inlet pressure: less than 20MPa

The maximum pressure: up to 50MPa

Batte melt pump advantages:

1, stable output pressure, can effectively reduce the extruder parameters caused by the unstable output of material and pressure pulsation.

2 dimensional tolerance and improve the quality of products, the extrusion to the minimum, reduce waste and scrap rate. Ordinary extruder can also produce high precision products.

3, improve the output, reduce the screw pressure required by the original screw to die pressure, to melt pump to die head pressure, the screw can be high speed extrusion, and can adjust the extruder pressure, reduce melt residence time in screw cylinder, stable plasticizing process, reduce the melting temperature, improve the yield and quality of products.

4, reduce unit energy consumption, data show that with the granulation of twin-screw extruder and melt pump combination, the mixing quality and yield is greatly improved than the single twin screw granulator. Energy consumption per kilogram of processing materials can be reduced by about 1/4.

BATTE company specializing in the production of high temperature metering pump, gear pump, metering pump, gear pump in the application of technology has accumulated rich experience. In recent years, according to the development of metering pump, gear pump application technology, especially in chemical fiber, spinning, chemical industry, on the basis of the metering pump, gear pump. Performance. The equipment structure is developed. Control technology to carry out the research in many aspects and achieved certain results.